# Sending triggers to brainvision EEG system from Psychopy coderview

**URL:** <https://discourse.psychopy.org/t/sending-triggers-to-brainvision-eeg-system-from-psychopy-coderview/11011>\
**Category:** Coding\
**Created:** [February 14, 2020, 7:12pm UTC](https://discourse.psychopy.org/t/sending-triggers-to-brainvision-eeg-system-from-psychopy-coderview/11011 "2020-02-14T19:12:00Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![qqian](https://avatars.discourse-cdn.com/v4/letter/q/74df32/32.png) [@qqian](https://discourse.psychopy.org/u/qqian)\
**Post date:** [May 19, 2021, 5:57am UTC](https://discourse.psychopy.org/t/sending-triggers-to-brainvision-eeg-system-from-psychopy-coderview/11011/11 "2021-05-19T05:57:50Z")

</div>

> [@alexaruel](#):
>
> If you launch BrainVision Recorder on the acquisition computer, go to Amplifier \> Digital Port Settings, you will have the parallel port installed on the display computer show up.

My EEG recorder isn’t BrainVision . After I followed your previous steps, Amplifier shows SynAmps2/RT here and my EEG mark does not show up on the computer where it was recorded. Do you know what the cause is? I really need help.

 ![微信图片_20210519135659](https://us1.discourse-cdn.com/flex002/uploads/psychopy/original/3X/4/d/4db71710e9031220cd1c99c96ca38b6bcb81ab46.jpeg)

---

_[View the full topic](https://discourse.psychopy.org/t/sending-triggers-to-brainvision-eeg-system-from-psychopy-coderview/11011)._